Plasterboard Connector

Characteristic

These connectors are used to link PLAtec elements if no frame is present.

Available in boxes of 50 parts.

Installed as indicated in technical appraisal CSTB No. 4-782 "PLAtecTM Drywall Finishing System"

1) Fit the connector onto the first previously-attached PLAtecTM element. Use the connector lugs to hold the connector in place against the edge of the board.

2) Screw the connector onto the first PLAtecTM element

3) Fit and adjust the second PLAtecTM element so that it is supported by the connector in place, maintaining a gap of 4 to 6mm.

4) Secure by screwing the second PLAtecTM element onto the frame and the connector.

5) Break the two visible lugs.

Plasterboard Connector

Characteristic

These connectors are used to link PLAtec elements if no frame is present.

Available in boxes of 50 parts.

Installed as indicated in technical appraisal CSTB No. 4-782 "PLAtecTM Drywall Finishing System"

1) Fit the connector onto the first previously-attached PLAtecTM element. Use the connector lugs to hold the connector in place against the edge of the board.

2) Screw the connector onto the first PLAtecTM element

3) Fit and adjust the second PLAtecTM element so that it is supported by the connector in place, maintaining a gap of 4 to 6mm.

4) Secure by screwing the second PLAtecTM element onto the frame and the connector.

5) Break the two visible lugs.

69a1ba41febbcacfa93c967913e0583d
If you don't see the pictures, you need Flash Player or Shockwave Player
Design by Com-Ocean