PLAtec Products

• Profils Alloy Extrusions
• Alujoint Inspection Door
• LB Galva Inspection Door
• PLAtec Plaster
• PLAtec Primer
• SB Blocks
• SB Plane
• Pre-Industrialized Products
• PLAtec Kits
• Plasterboard Connector

PLAtec Primer

PLAtec^TM Primer is used to harden the surface of the straight cut and beveled edge.

The primer is used as a tinted adherent base coat.

The primer is used on the straight cut and beveled edge only.

Keep away from gel.

Available in 5L and 10L drums.

Preparation of the product:
- PLAtec^TM Primer may be thinned before use with clean water to 10% of its volume: 10 dl of water for 1 liter of PLAtec^TM Primer.
- Drying time is approximately 45 minutes depending on the climatic conditions and the plasterboard itself.


Application:
- Apply PLAtec^TM Primer to the edges of the Lafarge Plâtres plasterboards using a brush.
Always wait until the PLAtec^TM Primer no longer feels sticky to the touch before coating it with PLAtec^TM Plaster for Joints.
- Wash the tools quickly with water before completely dry.
- Temperature for use: between -8°C and +30°C.
- Storage: 12 months in original packaging. Keep away from gel. Do not dilute.